Home > Commercial Door Operators

LiftMaster commercial garage door openers, including jackshafts, hoists and trolleys.

Sort By:
Page of 1
ATS2113X ATS - Advanced Trolley System 3900 light-duty commercial jack shaft garage door opener for standard or vertical high lift sectional doors by LiftMaster

Designed for use on residential or light-duty commercial door applications with standard lift.

The ATS 2113X Advanced Trolley System is for use on standard lift sectional doors up to 14' high, rated for 8 cycles per hour.
**Head Only - No Rail***

LiftMaster 3900 light-duty jackshaft door operator is designed for use on light-duty commercial standard and high lift (5 ft. high-lift maximum) sectional doors. Ideal for limited height, cathedral or obstructed ceiling installations.

3950 LiftMaster Commercial Jackshaft garage door operator for rolling sheet door applications - can mount on either the right or left hand side.  Rated up to 10 cycles per hour. MT5011 Medium-Duty Logic Trolley Operator by LiftMaster - For Use On Standard Lift Sectional Doors LiftMaster MJ5011 Medium-Duty Logic Jackshaft Operator for high or vertical lift sectional doors or small rolling doors and grilles

LiftMaster 3950 commercial jackshaft operator, can mount on either right or left hand side. It is designed for use on commercial rolling sheet door applications only. Maximum allowable door weight is 650lbs.

The MT5011 medium-duty logic operator is designed for use on standard lift sectional doors up to 14 ft high and up to 12 cycles per hour.

LiftMaster MJ5011 medium duty logic jackshaft operator for high or vertical lift sectional doors or small rolling doors and grilles. Built-in 3-channel 315MHz receiver for open/close/stop functions

MH5011 Medium-Duty Logic Hoist Operator - For Rolling Doors and Grilles - by LiftMaster LiftMaster MH5011 Medium-Duty garage door hoist operator -  For use on small rolling doors, grilles and industrial sectional doors with high or vertical lift T501L5 Low Profile Trolley Operator - Low Profile - by LiftMaster

LiftMaster MH5011 medium-duty logic hoist operator, 1/2HP, 115Volt, 1 Phase. For use on small rolling doors, grilles and industrial sectional doors with high or vertical lift. The MH5011 is UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection.

The LiftMaster MH5011 Medium-Duty Logic hoist operator, 1/2HP, 115Volts 1 Phase. For high or vertical lift sectional doors or small rolling doors and grilles. The MH5011 has a built-in 315MHz receiver. Compatible with 3-button remote controls for open/close/stop function. CPS-U commercial photo eyes included.

The T501L5 T-style trolley commercial door operators are optimal for general industrial applications. Suspended from the ceiling, the operators are used on sectional overhead doors with standard lift.

H501L5 industrial duty garage door hoist operator - by LiftMaster H501L5 Industrial Duty Garage Door Hoist Operator - by LiftMaster GH501L5 - heavy industrial duty gear reduced hoist operator - hoist wheel can easily be switch to either left or right hand side - for rolling doors

The LiftMaster H501L5 industrial-duty hoist operator, is for use on vertical or high-lift sectional doors, rolling doors and grilles. Continuous-duty high-starting torque motor.

The LiftMaster H501L5 industrial-duty hoist operator, left hand, is for use on vertical or high-lift sectional doors, rolling doors and grilles. Continuous-duty high-starting torque motor.

GH501L5 hoist designed for use on rolling doors, grilles, and industrial sectional doors with vertical or high lift. Hoist wheel is easily moved to Right or Left hand side of unit, eliminating the need to order right or left hand mounting.

   
 

LiftMaster Commercial Operators



3900 - Commercial Jackshaft Door Operator


3900RJOFor use on light-duty commercial standard, vertical and high-lift sectional doors. Mounts on either right or left hand side. The 3900 comes with push button limit settings, cable tension monitor and an APBS single button control station for open and close. Rated up to 10 cycles per hour. The Protector System safety sensors reverse the door automatically if the infrared beam is broken, before contact is made. Maximum allowable door weight is 650 lbs.
Click here to order the 3900RJO

Standard Features:

  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit settings
  • Security+ 315MHz radio receiver built-in
  • Mounts on left or right side of door
  • Cable tension monitor
  • Quick-Connect terminals
  • The Protector System Safety Sensor
  • Rated up to 10 cycles per hour

Dealers, for more information, please call:
(352) 638-9138




3950 - Jackshaft Garage Door Opener For Commercial Rolling Sheet Door Applications

3950LiftMaster 3950 commercial jackshaft opener for rolling sheet doors. The 3950 can mount on either the right or left side of door. The 3950 jackshaft side mounted garage door opener provides performance, flexibility, safety and value at an economical price. The operator comes complete with the necessary mounting and sprocket hardware for installation on either live or dead shaft rolling sheet doors, as well as photo-sensors to insure safe operation. Available with optional accessories, such as the EverCharge Standby Power battery backup system for operation during power outages and additional mounting and safety hardware.
Click here to order the 3950RJO

Standard Features:

  • Heavy-duty 24V DC motor
  • Security+ 315MHz radio receiver built-in
  • Push Button Limit Settings
  • Rated up to 10 cycles per Hour

Dealers, for more information, please call:
(352) 638-9138




GH501L5 - Heavy Industrial-Duty Gear-Reduced Hoist Operator

GH501L5LiftMaster GH501L5, Logic 5.0 gearhead hoist. Gearhead style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage. The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles. GH operators are attached to the door jackshaft to indirectly drive the door.
Click here to order the GH501L5

Standard Features:

  • Continuous-duty high-starting torque motor
  • 3-button station for open/close/stop functions
  • Security+ 2.0 radio receiver built-in
  • Timer-To-Close
  • MyQ Technology

Dealers, for more information, please call:
(352) 638-9138




MH5011 - Medium-Duty Logic Hoist Operator

MH5011The LiftMaster MH5011 is a Medium-Duty hoist opener for rolling sheet doors. For high or vertical lift sectional doors or small rolling doors and grilles. Medium-Duty Logic programmable integrated circuit board. The MH5011 has an adjustable friction clutch and high-starting torque motor with overload protection. It has an emergency chain hoist with electric interlock.
Click here to order the MH5011 right hand
Click here to order the MH5011 left hand

Standard Features:

  • Powerful 1/2HP, 115V single-phase motor
  • Heavy-duty solenoid-actuated brake
  • 3-button station, for open/close/stop functions
  • 315MHz radio receiver
  • NEMA 1 type electrical box
  • Heavy-duty oil-filled bushings

Dealers, for more information, please call:
(352) 638-9138




H501L5 - Industrial-Duty Hoist Operator

H501L5The H501L5 is a commercial door operator 1/2HP. It is for use on vertical or high-lift sectional doors, rolling doors and grilles. The H501L5 has a continuous-duty high-starting torque motor with instant reverse and overload protection. Programmable mid-stop, which permits an automatic stop between full close and full open. Adjustable friction clutch, helps protect against major damage to door and operator should the door meet an obstruction. Security+2.0 Radio Receiver is standard on-board with Logic 5.0 operators. Includes floor level chain to ease manual operation in an emergency or power outage.
Click here to order the H501L5-Right
Click here to order the H501L5-Left

Standard Features:

  • 3-button station for open/close/stop functions
  • Security+ 2.0 radio receiver built-in
  • NEMA 1 type electrical box
  • Adjustable friction clutch
  • Industrial ball bearings on 1" output shaft, heavy-duty oil-filled bushings on reduction shafts.
  • Mid-Stop, stops door at programmable mid-stop during open travel
  • Timer-to-close conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed.

Dealers, for more information, please call:
(352) 638-9138




MJ5011 - Medium-Duty Logic Jackshaft Operator

MJ5011The LiftMaster model MJ5011 is designed for use on industrial sectional doors with high or vertical lift and on small rolling doors and grilles. It has a high starting torque motor with overload protection and an adjustable friction clutch. Operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. The MJ5011 is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment. The MJ5011 has an integrated timer-to-close, programmable from 5 to 60 seconds in 5 second increments.
Click here to order the MJ5011

Standard Features:

  • 3-button station for open/close/stop functions
  • 315MHz radio receiver
  • NEMA 1 type electrical box
  • Adjustable friction clutch
  • Heavy-duty solenoid actuated brake standard
  • Integrated timer-to-close programmable form 5 to 60 seconds
  • 1/2HP, 115volt, 1 phase, 60Hz

Dealers, for more information, please call:
(352) 638-9138




J501L5 - Industrial-Duty Jackshaft Operator

J501L5The J501L5 is a 1/2HP continuous-duty door operator designed for use on industrial sectional doors with high or vertical lift, and rolling doors and grilles. Removable hinged electrical box cover. It has a continuous-duty high-starting torque motor. The J501L5 has programmable mid-stop, which permits an automatic stop between full close and full open, and maximum run timer, that prevents motor overrun and damage to the door and/or operator.
Click here to order the J501L5

Standard features:

  • Security+ 2.0 radio receiver built-in
  • Continuous-duty high-starting torque motor
  • 3-button station for open/close/stop functions
  • NEMA 1 type electrical box
  • Adjustable friction clutch
  • Timer-to-close
  • Floor level disconnect

Dealers, for more information, please call:
(352) 638-9138




MT5011 - Medium-Duty Logic Trolley Operator

MT5011The MT5011 is designed for use on standard lift sectional doors up to 14ft high and up to 12 cycles per hour. It is a 1/2HP, 115volt, 1 phase, 60Hz. The MT5011 has a high-starting torque motor with overload protection. It has a medium-duty logic programmable integrated circuit board.
Click here to order the MT5011

Standard Features:

  • 3 channel, 315MHz radio receiver
  • NEMA 1 type electrical box
  • 3-button station, for open/close/stop functions
  • Integrated Timer-to-Close allows programming from 5 to 60 seconds
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4 or CPS-EI)

Dealers, for more information, please call:
(352) 638-9138




T501L5 - Low-Profile Industrial-Duty Trolley Operator

T501L5The T501L5 T-style trolley commercial door operators are optimal for general industrial applications. Suspended from the ceiling, the operators are used on sectional overhead doors with standard lift.
Click here to order the T501L5

Standard Features:

  • Continuous-duty high-starting torque motor
  • 3-button station for open/close/stop functions
  • Security+ 2.0 radio receiver built-in
  • MyQ Technology
  • Timer-To-Close
  • NEMA 1 type electrical box

Dealers, for more information, please call:
(352) 638-9138




LGJ - Light-Duty Gear-Reduced Operator

LGJLGJ is designed for use on rolling grilles and shutters and on small rolling doors. The model LGJ is easily wired for C2 or B2 wiring. The operator is pre-wired to accept a sensing device, photoelectric sensor, radio controls and most types of access control equipment. 3-button station, for open/close/stop functions, is standard for all operators

Standard Features:

  • Control Circuit: 24V NEC Class 2
  • NEMA 1 type electrical box
  • Floor Level Disconnect: provides emergency manual operation
  • Maximum recommended duty cycle: 7 cycles per hour

Dealers, for more information, please call:
(352) 638-9138




MGJ - Medium-Duty Logic Gear-Reduced Jackshaft Operator

MGJThe MGJ commercial garage door opener is designed for use on rolling grilles and shutters. The MGJ jackshaft has a high starting torque motor with overload protection and a medium-duty logic programmable integrated circuit board. The MGJ has an integrated timer-to-close, programmable from 5 to 60 seconds in 5 second increments.

Standard Features:

  • 1/2HP, 115V single-phase motor with instant reverse
  • Heavy-duty Worm gear-in-oil-bath speed reducer
  • 3-button station, for open/close/stop functions
  • 315MHz radio receiver
  • NEMA 1 type electrical box
  • Maximum recommended duty cycle: 12 cycles per hour

Dealers, for more information, please call:
(352) 638-9138